Name: LuxHeat Radiant Floor Heating Cable System with Uncoupling Membrane & Floor Sensor
Availability: InStock

Kit Contents

Features & Benefits

The LuxHeat radiant floor heating cable kit and uncoupling membrane boasts the following features:

✔ Dual insulated heating wire with single cold lead.

✔ Listed by cULus for use in both the USA and Canada, specifically designated as safe for wet locations.

✔ Achieve consistent heat distribution at 12 watts per sqft using 3-inch spacing.

✔ Experience ultra-low electromagnetic field (EMF) with advanced dual conductor technology and foil sheath.

✔ The heater wire, with a thickness of less than 5/32 inches, ensures a minimal impact on finished floor height.

✔ Install the cable any arrangement or configuration to accommodate your floor layout.

✔ This product is recommended by health professionals for individuals with allergies.

✔ Ensure safety for children, elderly, and pets with no hot, exposed, or moving parts.

✔ Eliminate unattractive heaters, storage hassles, maintenance, and unwanted smells.

✔ Designed for commercial and residential interior tile applications. Suitable for both plywood and concrete subfloors.

✔ Protects and preserves your floor covering using crack isolation technology and vapor management.

✔ Vapor management system employs air channels underneath the fleece layer to dissipate vapor and moisture.

✔ Compatible with multiple heating cable sizes, ranging up to 0.2” (5mm) diameter.

✔ Allows for 3” (7.6cm) cable spacing to easily achieve the ideal heat distribution of 12 watts/sqft.

✔ Membrane Thickness: 0.26" (6.5 mm). Can be used to create a smooth transition to higher floors.

✔ Achieved an EXTRA HEAVY Performance Rating according to the ASTM C627 Standard.